[車仔齊齊砌] 1/20 Alpine A310 V6改 2015年型 葛城専用車...

新手砌車好無知，
打磨拋光唔容易．
公司太忙時間少，
心急製作有瑕疵．
還望各位多指點，
下次砌車可改善．

More... from diff views...

inside....

About Alpine A310...

===

The Alpine A310 was a sports car built by French manufacturer Alpine, from 1971 to 1984.

The A310 had a rear-mounted engine and was initially powered by a four cylinder 1.6 L Renault engine, with maximum power reaching 127 PS DIN (93.5 kW/125 hp), thanks to the use of two double-barrel carburettors. In 1976 the A310 was restyled by Robert Opron and fitted with the more powerful and newly-developed V6 PRV engine. The 2.7 L motor was modified by Alpine, fitted with a double-barrel carburettor that pushed power to 150 PS DIN (110 kW/148 hp). The road car still used a four-speed manual gearbox. Thanks to its low weight of 980 kg (2160 lb), the A-310 V6 could achieve 210 km/h (130 mph).

The A310 had some success in French motorsports as a Group 4 car.

A bright blue version of the A310 with modified headlights was featured in the anime series Neon Genesis Evangelion; it is the car driven by Misato Katsuragi.

===

Real Car:

1/20 葛城 + A310...



This box:

My beloved Evangelion!

Any comments?
多年沒砌車... 還望各位多指點， 下次砌車可改善．

PS: 2006 收爐...

like clio v6

唔錯喎 藍色係咪自己溝??
但係咪未做拋光

醒喎，擺EVA蛋蛋人仔，好正有旅行feel
都坐得哂喎

算唔算係 GT car??????????

藍色 = 星星metallic blue.
tried 拋光, but effect not good...

蛋蛋人仔 is a bit larger than 1/20 actually...

no idea wor...

This one: Renault Alpine A310 GT Pack Red (J1610)
http://www.modelenium.co.uk/mode ... ack-Red--J1610.aspx

maybe theres a slight problem with your polishing technique [i know it's hard the first time]
why done you share it with us and see if we can help u

我而家先睇到架車好似有 motor, 會行喎....

樓主一定係好仲意 EVA, 我見你砌咗好多EVA 模型.....

[ 本帖最後由 Rox1 於 2006-11-14 11:40 PM 編輯 ]

製作過程:
http://www.hkml.net/Discuz/viewt ... p;extra=&page=3

I tried 拋光 + 用2000 水磨沙紙打磨... 花曬/穿曬...
Have to 噴主色 again... but I am quite busy for office work recently...
no enough time to 拋光 - 打磨 - 拋光 - 打磨....

Main reason is my skill is not good! Need more practice!

anyway, thx for all of your help!

motor 是假的...

富士美有其他Alpine車(有motor and 電池), but this car don't have.
There are other parts to replace the motor/電池 area for the Alpine 車模 for this car...
That's 富士美! 富士美出d模型車真係...

Yes, I like Eva very much!

好正呀∼∼
好鍾意車廂中控個三粒ＢＵＴＴＯＮＳ∼∼！！！
正∼！！

記得隻第三使徒嗎？
我重未有心砌．．．

heres my steps~

1 color/ clear coat， personally i like a thick coat of clear coat~ to avoid 磨穿, so i do 2 -3 thin layers then 4-5 heavy coat
2 then generally fron what i heard and experience, i'll let it dry for 2 weeks minimum
3 if theres not too many orange skin, then i just use 2000 sandpaper to flatten the surface, if there orange skin then start with 1500 then follow with 2000, this step will provide a flat surfect for polishing~ （打磨）
4 then i will use the 3 tamiya compound to polish~ fron crose to fine to finishing, after this step u can pretty much see reflection clearly fron the surfece （抛光）

sounds like a easy process, but it takes a lot of heart to achieve a good finish~
just try next time~~ im sure u'll get the hand of it with practice
add oil man~ i support u~!