HG Origin 026 - RX-78-1 - Gundam

最近好似出左隻SD版的RX-78-1, 經過見到覺得都吾錯, 於是想自己噴番隻.   咁當然係搵我近期至愛系列, Origin來搞搞佢啦.

上次隻原色Origin RX-78, 我自己覺得其實好靚, 不過無論FB, 討論區都吾多人討論, 吾緊要, 我成日鼓勵自己, 自己覺得靚就夠啦.  今次整RX-78-1, 上完色後組裝起, 第一個感覺係以後都吾好搞改色......總感覺吾係好靚.  跟住滲番線, 加番銀色線, 個感覺總算出來了.  

對比普通HG, Origin版算多件, 不過其實吾係真係太多.  都係一陣就完成.  成個製作最煩係中間紅色個2片, 我最後係自己剪膠片放入去而吾搞遮蓋.   因為吾想黑白對比過大, 黑用了上次百式亂溝剩下的深深灰藍色, 白色也放棄一貫的107, 用了深一個層次的淺灰白色.  選色的時候, 我係對住自己整個塊色板去選, 其實真係好方便, 不枉我t花咁多時間整.  紅色用了馬沙的深紅色.  之前想用鮮紅, 不過都係深沉小小好睇點.  黃色用番黃而吾係橙黃.  另外噴咀等一貫用銀色.  本來都想係黑色位噴高光, 不過真係忙得滯, 無時間搞, 所以黑位都係平噴.  可能係噴陰影時重/輕手左, 白色部份有小小件有吾同色,  都係懶, 吾搞了.  反而係用多左時間去決定關節位的件用咩色.  因為想做番小小吾同色的效果, 出來的效果都係滿意的.  腳眼, 小腳等圓形位, 係先噴白色, 之後用原裝貼紙做遮蓋再上黑色.  用原裝貼紙做遮蓋係我呢個懶人常用技巧之一,  其實好好用, 不過一定要快.  我通常吾會過夜, 噴之前先貼, 乾左即晚撕走, 因為如耐越難撕.  本來呢盒無諗住整支炮, 因為要搞好多無縫, 不過完成後又覺得用炮靚d, 於是用上次個盒支炮, 所以支炮相對係白小小.

黑 : 亂溝的深深灰藍色
白 : Mr. Color 338淺灰, 陰影用UG09
紅 : UG22 - 馬沙深紅, 高光用UG20 (正常都睇吾出)
黃 : UG21 - 黃, 陰影用UG20
銀 : SM206
關節 :  UG09 - 淺灰 / Gaia020 Gun Metal

呢類型非正傳機, 改色版, 我一般都係覺得適合多水貼.  不過發現市面吾多白色的EFSF水貼, 可能高達本身係白色, 所以小出.  跟住諗住搵鐳射大炮用的水貼, 竟然又係無.  另一個問題係我吾肯定RX-78-1屬吾屬於木馬號, 因為好似未出場就無左, 所以吾敢用WB標誌.  結果係用普通水貼算了.

總結來說, 吾知係吾係睇慣左定係自己手功吾好, 總感覺原色比較靚.  最近面對的問題都係眼高手低的問題, 因為每次開檔去噴油都好花時間, 好多野都係得過且過.  小弟能力有限, 無能力設置自己專用的砌模型空間, 走鬼檔真係令我很累.  好想搵日可以一個人坐係度, 聽住歌, 一路砌模型.  不過呢個想法真係極難實現.  點都好, 就算環境有點局限, 都希望每日整小小, 努力去完成自己的成品.

Full Size Photo link :
https://photos.app.goo.gl/ViRZsvdQdjbBbdnF6

#RX78,#Gundam, #HGGundam, #Gunpla,#HG

自己覺得enjoy就夠啦



...以後都吾好搞改色...
改色 need practice too,
to train sense of color combination.



i feel yours G1 color scheme:
two main colors have (too) high contrast,
but darkblue grey is too depth, combine with the shadow effect on white armor,
overall became too dark;
also, the dark red can't create highlight effect,
yellow cross on shield is redundant when mix with black + white + red.
and the backpack in white color?
so the result not attractive.

for me, i will choose
charcoal / germany / darksea grey + light sky grey as main colors;
then use sunset red as highlight.



finally, white backdrop not suitable to take photo for black/white products.
try to use pale blue, pale green as background.
you will find yours G1 upgrade in no time...



even you feel not so good,
because it is gunpla + shadow effect,
still mark as 好貼.
this kind of "standard" already answer: ...不過無論FB, 討論區都吾多人討論 ...
the forum/FB pushes away rookie, low level, non typical way modelers.
the system already blocked the users to join it, how to build up the discussion?
thus, 自己覺得enjoy就夠

[ 本帖最後由 ygat 於 2021-9-24 11:17 AM 編輯 ]

thanks for the comment.  

I actually read much when I am preparing to build this kits.  lower the darkness of black and increase the darkness of white is my first impression when build this.  thus, I used a light grey with a dark dark blue.  and I want to make the overall scheme to becomes more "dark", thus I used the dark red instead of bright red.

after adding back the silver line, the kits looks much better.  be frank, this model original colour scheme is high contrast which totally not my cup of tea.  I satisfied with the result and I tried to make a good "pose" for it.

I have up and down in this year and I am happy that I still love to build the model.  My skill are improved but my requirement even increased more.  so, I always frustrated about my work  : )

I start the next project and it's RG Hi-Nu.  after spending many days, just completed to cut the parts and polishing around 70% of it.

i like soft tone, therefore i suggest sunset red;
you want dark tone and satisfied with the result.
no correct answer at all, so enjoy it.



no specific project after Metal Gear Rex, so i just painting AFV now.



i like MG ver.Ka 's proportion;
leg of RG is too fat, but upper body is too thin.
[attach]495773[/attach]



did you buy the additional parts for this RG Hi-Nu (海牛)?
[attach]495772[/attach]

[ 本帖最後由 ygat 於 2021-9-24 05:23 PM 編輯 ]

same as my comment.  the lower part of legs are too strong and hands parts are too thin.  don't ask me why I bought it and make it....