Volks IMS 出1/100 KOG.  中左.....算啦, 入坑.

https://www.taghobby.com/archives/480501

以前砌過Wave FSS, 砌到想死, 左右夾埋, 又多夾口, 可動又差.  當年未有能力, 買左罐金色噴, 砌到pat 屎咁, 已經張佢地送去堆填區.  今次入坑, 希望好好地砌.o

我已經入手1/100黑騎士, 1/100 LED同1/144黑騎士.  仲有好多隻想入, 不過無位同埋真係好貴, 好多盒郁下過1000.

至於呢隻KOG, 基本上係一定入的.

各位師兄, 有無砌過IMS FSS?  可吾可以俾d意見?  難砌嗎?  我上網睇過, 覺得分件吾錯, 似乎吾需要太多遮蓋.  印象中FSS大多係光面, 吾似Gundam用啞面.

黑騎士 :
外甲用Gaia Gun Metal色, 骨架用啞面灰黑色, 紅色都係metal色.

請問外甲用左金屬色, 會噴陰影嗎?  點處理?
金屬紅想調暗點應該加乜色?
本身個盾有幾點橙色.  如果想用金屬色, 可以點?  銀底加透明橙吾係會變金色咩?

LED :
白色應用乜色?  光面定啞面?  定用珍珠色?  LED 會噴陰影嗎?

KOG :
金色會噴陰影?

吾好意思, 初入FSS坑, 想問多小小.

waited two years, finally come.
i prefer 1/144 more, but will buy 1/100 too



as i remember, most of the FSS won't spray shadow effect.
gloss or matt topcoat subject to you.



metallic colors, could try gaia.
https://www.gaianotes.com/products/gaia-color_metallic.html
https://www.gaianotes.com/produc ... r_limited_vol1.html



LED is not white armor, should be clear armor.
at least v3 version, the one you bought. it is clear armor that can see the mechanical details underneath. go search online.



意見? i already mentioned in your RG post.



wave's FSS

     

[ 本帖最後由 ygat 於 2020-9-21 04:22 PM 編輯 ]

don't remind me for Wave FSS.......  nightmare....

beware the plastic of volks IMS is different from bandai, need to check yours cement/glue is suitable to stick it or not.
the gaps is not so fit and the joints are weak. also, need to masking for details.
after these, IMS just typical model kits.
don't afraid, since you always spray gundams, i think white color LED shall be easier to handle.



btw, the price of volks is much higher than gunpla.
do you see 1/144 band-doll in the market?



The Batsh, i used spray can to complete it 9 years before.

Volks 我有砌過隻1/100水龍, 質數....... 要買多幾支膠咁囉 , 夾口係ok, 因為D樁位好多虛位, 可以慢慢移到啱, 外型係ok, 但可動性同wave一樣咁..............差

下面係小弟劣作, 同小小評語 , 只能希望KOG新D會好D
http://www.hkml.net/Discuz/viewt ... 7867&highlight=

砌之前請帶點覺悟!!

師兄，其實我係睇完你呢盒先知有IMS呢個系列.....

覺悟
don't say that, not so difficult at all.
QC is similar to typical model kit by tamiya, wave, hasegawa, koto.
just the price & QC of bandai is above average.

所有野都系相對的, 對於小弟這種低手當然要覺悟下啦

好一般的情況下. FSS 都係光澤, 唔玩消光. 要令, 但又唔會去到鏡面. 夠"滑"就得了.

除左"黑騎士", 無論係 二代/五代, 定三代.. 都要可玩陰影/消光/令面.

而網上有唔少"死硬派", D色離開插畫設定少少都會"出聲", 點去理會就當然睇自己了.

我今日拎左盒144黒騎,順便去模型舖買支膠水,問老闆多幾句,拎埋盒模型出嚟問要用邊支.  佢好似嫌我白痴吾想理我咁.  大佬,我砌bandai模型大,真係小用膠水,成個櫃咁多款,鬼知邊款好咩.  最後個後生仔幫手, 望左兩眼盒件,話係正常模型膠, 普通膠水ok.

結果買咗支透明橙蓋,方型雙星.

坦白講, 自知基本功不足,今次砌五星真係驚驚地.

LED V3, 設定係叫"透明白", 同KOG 設定叫"透明金" 差唔多.

我真係吾識佢原來有咁多代.  最近搵過下,比較喜歡的機體有最強幻象,黃金電騎,破裂人偶同黑騎.  但最強幻象又有鬼死咁多款.  真係複雜...可能一個從來吾玩GUNDAM的人第一次睇高達模型都一樣.

但半透明奶白色堅吾靚.

奶白色吾靚
yes, i feel sad when knew model kit's plastic is 奶白 unless clear.

therefore, most people just spray warm/cool white color.

[ 本帖最後由 ygat 於 2020-9-23 10:08 PM 編輯 ]

模型產品近十年出左好多新野, 好多樣都係差唔多, 唔熟真係唔知有乜分別. 問老闆佢唔係砌開模型既, 真係未必知, 就算問埋個倉務後生都未必知有乜"實際"分別的呢. 佢隨時會冇心咁答錯你添.

淨係膠水都有分流通性, 用係乜野膠上面, 咁就已經幾種了. 快唔快乾又幾種了. 每個廠又出一枝咁又幾隻牌子了.

anyway, 我check 返我盒1/100 IMS 黑騎士, 用既係PS 同PE 膠. PS膠用"普通模形膠水"就得, 高流/快乾都無所謂...
PE 就... 用AA膠都隨時甩. 要黐PE有非常煩既功夫同用品.. 無廠會要求個客去黐PE膠...

盒野無用ABS膠, 所以應該無乜野要再擔心.


題外,
就好似呢兩枝softer咁, 唔係有demo, 都唔知 強, 同好很強 分別係乜. 你問舖, 我估都真係無人識答.

https://nippper.com/2020/07/5815 ... gVcOB0mFIG3LJb-XQes

剛剛睇到個膠水比較>>
https://nippper.com/2020/05/1264/

[ 本帖最後由 VampireA 於 2020-9-23 10:45 PM 編輯 ]

最強噴實色純白應該無人會出聲的.

路過想問一下邊度會搵到五星首辦現貨賣
我見大部份都係淘寶有…
又唔係好知佢地d件點

呢排想搵奧津…

原來IMS係幾年前已經話出kog......吾知今次真定假

你上 Carousell 搵下啦