1/35 Zeta 高達 胸像

完成了！好大隻! 土地問題…沒地方擺呢!

Note:
* 有LED燈組,有遙控開關 (常亮模式呼吸燈模式) -不錯
* 這套件部分有隱藏水口設計,附屬了部分金屬零件
* 地台有機械臂和投射燈 (但是我沒有採用地台，因為它太大了,冇位放)
* 水貼量非常可怕,我只貼了小量
* 懶，只上了一點色 (Gundam Marker, 主要是金色和銀色)

自娛之作,謝謝觀賞...



--

LED Off


LED ON - 效果不錯




--

Backpack




--

Pilot inside


--

內構




--

好大隻 vs 1/144 (RG)

you also make this kit, this is 3rd time see this bust within a season

最近好多頭像

Thanks for commenting

咁啱得咁橋...
我都有留意，之前兩位師兄應該是相識的
我卻是獨立事件呢

其實我買咗大半年了，最近先得閒切呢

同一間廠出的獨角獸和新安洲胸像我都有砌呢！

但1/35太大隻了，家中已無位了，可能是最後一隻大胸像 heehee

是強國製造嗎？ 香港買唔買到？喺邊度買？ 同埋幾錢？

又見到一隻,好熱鬧.
其實我都係睇到之前個師兄個POST先INBOX問佢走去買, 覺得面相做得唔錯..
我都係第一次入手砌副廠模型, 呢隻比我想像好砌, 只係有D位太緊, 最後我CUT左先拍得埋..
同埋水貼有D厚..其他算唔錯, 另外幾個頭像都沒打算入, 真係太大沒位放..

家中已無位了, me too. this became the major issue to slow me down

same here... my mode/toy display "cabinet" becomes very crowded now... need to put some old completed model back to boxes and free some space to display the newly completed.

同一間廠出的獨角獸和新安洲胸像我都有砌呢！
新安洲和Zeta都出得唔錯！
below is fyi.





[ 本帖最後由 tomcat 於 2020-2-25 01:56 PM 編輯 ]

Unicorn同新安洲個面相都出得幾ok架,不過個機械結構同led就冇得同部Zeta比了,如果Unicorn 既led可以好似zeta咁應該會正好多
睇得出億輝一路出一路有進步 期待會有下一隻
不過最大既問題係地方問題

in old days, only Resin has large scale (e.g. 1/35) Gundam Head and Bust => too expensive and hard to build.

Recent years, PRC factories started to produce gunpla Head/Bust, some with good quality and some are not good at all.
億輝 is the one 一路出一路有進步! Unicorn in 2017, 新安洲 in 2018 and Z in 2019.

However, there are too many "Head/Bust" products in markets suddenly (from different factories), and not inexpensive... seems its is saturated (飽和) and demands reduced.
and there is corona virus outbreak…
Not hear of 億輝 has any new 胸像 model in 2020 yet...

"#I #U "is coming

sorry asking, what is "#I #U " ? thanks.