第2次砌車仔~ 心想為何依到咁少人砌落場車...
就買下這GTR, 好好挑戰一下...做做下就開始出事啦...
依部GTR令小弟深知基本功不足...
不過我已然會同大家分享我的失敗作
相信下部會更好!
















加外景










最後要補多句....「砌落場的人真是太他媽的勁!」

落場車好多細節位置,做得好唔易,加油

直頭係吃力不討好tim啦
都係D高手先整到...

This decal scheme relatively speaking is not difficult to apply. How come some of them are broken. Tire logo you can try airbrushing via template. Keep trying next one will be better.

應該係浸水紙心急拉爛咗

我諗都要死多幾部先會好一點....
我係上水貼前冇上光油... 冇貼服... 之後上光油就出事...
Raptors 大, airbrushing via template姐係點? 小弟英文比較水皮

第2次砌都算OK架啦,望落都幾整潔,可以睇下其他C兄個D R35,從中睇下有咩可以下次做得好D,加油

我有睇呀...不過做唔到姐嗎...囧

via template 即係用蝕克片, 用佢遮住噴個呔

I believe that you ruined the decals while clear coat. We made the same mistake 1st time as well. I have a suggestion for you. For this car not much decal, you don't need to apply clear coat on decal. You can clear coat the body color then polishing it. Once it is glossy then apply decals. Put a wax on it Done. If you need to apply clear coat on decal, I suggest you use airbrush to apply a few mist coats first and gradually build up the clear coat. If you use double actions airbrush, you can spray air to dry the clear coat faster. this way you can watch the reaction of the decal or if there is any dust. Usually I use this method to spray the clear coat and finished it in about an hour. ( You can do it for more than one car to save time)

我就係用蝕克片遮住噴個呔...(不過唔知係未油比例問題...有D化化地...
有D花左的是我之後不小心整花的...

Raptors大: 整體都明白了...不過我都沒什麼時間砌模型...(汗
更莫說同時砌幾部呢...