呢張相睇落好似好番啲喎

又一次証明大笨D野圖只供參考！

原來個膊頭跌左落黎唔怪得。。。。
不過隻手咁長咁既

唔改對腳就可以唔洗買

SORRY唔好意思阻住各位師兄comment隻毀容沙薩比

但seniyat大大既速寫好靚，基本功好好，介唔介意share閣下既blog/pixiv俾大家睇下你更多既作品 ?

Btw, so curious of why no one would have any interest to give a critique or at worst a care,
maybe knowing how to build Gunplas is way way far from being an aesthete ... =P

睇清楚先見到，原來左右手係兩種唔同嘅手掌，不過好似兩隻都唁係好夠大，唔係好襯........

BANDAI 班粉腸一定係攞左個CAD圖直接3D 打印 呢隻咁既垃圾出呢, 套實模可能未鑼完, 等你班傻仔期望跌到谷底先滲啲滲啲修訂出黎, 呢D 扮專業叫"期望管理", 正確就係"吊鳩黎賣"!

我睇好呢隻SAZABI

咁都唔退訂﹐真係測試死士既底線~~~

當然知道呢件係 快速成型 , 之後鋼模出會緊湊好多, 現在鬆泡泡情況會執正, 再戴番正頂頭盔, 就無咁甩皮甩骨啦

"手掌" 更加唔係問題所在, 依家呢對 係求其一隻 MG 借用而已

主要問題係對小腿及, 前甲咁一條橫綫畫開, 同肥佬著橫間條衫一樣, 視覺上更肥更短, 如果一定要分, 折綫會好好多. 再者個型都太圓太鈍, 修身啲好啲.

最大問題係 小腿兩側裝甲, 完全唔夠大, 傘得唔夠開, 參考十多年前大魔就ok, 另一方面,

裝甲個曲面 (contouring) 都唔靚, 唔夠多起伏, 比 MG 原版更不足. 如果呢 set CAD data 去起模, 就真係兇多吉少. 又要等泡菜改件

話晒等咗拾年 無話唔買嘅 不過由座底兩隻 可能買一隻算數

我自己來講 可能睇唔到再多十年 可唔可能再出 ver 3.0 , 出都可能玩唔到鳥, This is the last call

totally agreed, like you said, waited more than 10 years, already anticipated will have sazabi when Nu ver. ka announced... i even gave away my MG sazabi and Nu to my8 year old nephew (which he already assembled during this summer holiday....)  in anticipation i will buy the ver. ka!!!

the armour split line on the shin guard is the worse and something i'll be forced to modify... others were improvement (some very slight) over the original MG, the curvature of the skirting actually is ok, it's just that the knee and shin guard had been enlarged but the skirting didnt get the same treatment, the biceps ont he arm also improved. the only thing is, Katoki is known for his balance, he usually can achieve very good balance between his design and original designer's Mobile Suite design, but this one i felt he didnt do enough instruction for the CAD engineer to actually produce a good product, considering the amount of time he had versus the short time frame given to him when he supervise the original MG Nu and Sazabi. considering bandai's available technology, it is really no excuse to produce a finish product that doesnt at least resemble 85-90% of Katoki's sketch

overall i would said there's been a lot of improvement over the original MG, the original was deem too skiny and not MA enough, i can see that they really put it a point to design a more "heavy" looking MS, it's just that there must be a balance, i hope the finish one will be better, i dont mind the split armour thing, although for me its 'more of a sales gimmick, but like the ver. ka Nu, we are give n the option not to split the armour and still have a nice design, the armour split on sazabi is looking more like a distraction than really an good option...


thanks for the nice comment on the rough sketch....

[ 本帖最後由 seinyat 於 2013-9-6 04:31 PM 編輯 ]

SAZABI的外型本來就很難掌握
一不小心就會走味
目前可以說是沒有真正外型完美還原設定的SAZABI商品或GK
就算是HGUC或是HCM PRO很多人認為外型好的
我都覺得不夠厚重霸氣
MG即使給原設定出淵裕設計
我相信也有很大機會會出槌

no reason to be upset (yet), IMO they shouldn't have put this ugly prototype on display.
they did it last year with the Nu Ka, proportions looked totally off. A slightly different angle makes a world of difference too.

只等撒咋比 太强悍了 最好出个电镀版

而家呢代出唔到自己心中個外型就等於垃圾

冇辦法啦！人人心中想要嘅外形都各有不同。不過呢D都係大笨嘅錯，佢出模型又幫你分哂色，又幾乎冇水口，所以令到有D人小咗D改造能能力!

[ 本帖最後由 free3duklee 於 2013-9-15 11:48 AM 編輯 ]

唔鍾意的話，
好快又有韓式

首辦，改件之類

隻龍飛個頭搞物同的畫差甘遠隻鴨比將小腿件甲修反細的的就好睇