is there any way I can make this tracks into hard plastic or resin? since I don't like this "soft plastic" tracks...


since I know there will not be a third party make this into moveable tracks for sure...

so I want to find a way to improve it myself...
many thanks brother

P.S. I really donno how can Bandai did this... 1/35 tank (32.5 cm length) cost 9000 yen without hard plastic tracks...

[ 本帖最後由 LifeAfterDeath 於 2009-2-7 01:48 PM 編輯 ]

同 resin 覆履帶我只知呢個壇得一位師兄 post 過.... 不過要用橡膠做模, 好似無乜可能, 只少接駁位已自己重做過哂.

不如研究一下換過哂 d 路輪同起動輪, 換一套現成有拚接履帶既, 咁會唔會實在 d ?  科幻類別, 應該唔會太大問題呱....

自製一格覆履, 再覆所需長度嘅格數唔得咩？

yes this is what on my mind...

the reason I believe this track is no replacement because is the size matter...
just the tank is already 32.5cm long...
and I don't think there is any other real tank as big as this...

even there is my guess is WWII Germany Tank... but I don't think it will fit that well with Type 61...

that is what on my mind at the moment... make the first one with plastic card... then start casting it but since the mold is only be able to last for maybe 10-20 cast...
and this tank need hell alots of tracks... my plan maybe cast 5-10 pieces and start a new mold to cast 10 tracks at a time...

but I really donno how long it takes to make this tracks...

長度唔係問題, 一盒唔夠買夠兩盒, 兩盒唔夠買夠三盒....

問題係配邊種路輪, 我成日覺得呢架車會參考現代日軍 d 坦坦黎做, 樓主不妨向呢方面著手, 好過用 WWII 系列.

我覺得兩段履帶既接駁位會難做少少.... 一做都要做兩段, 確保兩邊入位都正確.

btw, 可唔可以 post 一 post 路輪既版件圖, 同說明書步驟 ?

well the size matter...

here is the photos of the tracks

almost 22mm wide = 77CM wide real tracks...

thanks for point that out... didn't think about it at all...
so I have to make at least 2 tracks in order to start casting...

surething.... give me sometime and I will post it later...

如果唔嫌紋理簡單得濟, AFV Club 嘅M48/M60 早期履帶其實幾match, 闊度又係差唔多 22mm

Here are the stuffs...
menu





models








personally beside the size matter I really donno how this model cost 9000 yen...

呢架前驅定後驅架 ? 兩邊都係帶齒既起動輪既 ?

centurion 點睇 ? 2.2 cm 闊唔成問題, 淨係 KT 都闊過佢.    買一套 centurion, 換哂佢既轆過去 (剛剛好六 set 路輪), 加買兩套拼接履帶, 應該夠哂用.

套件 option :
http://www.perthmilitarymodellin ... fvclub/afv35100.htm
http://www.perthmilitarymodellin ... fvclub/afv35122.htm
履帶 option :
http://www.perthmilitarymodellin ... fvclub/afv35102.htm

hope it helps. 我唔多識現代野...

thanks alot and I will check it out later...