Dear all,

I don't have problems 滲線 on my MG Z-Gundam for the blue, red, and yellow colors.  But when I 滲線 on white color, and wipe it off later, it will left some stain on it.  Can anyone help and tell me why this happens?

Thanks!!!

你有冇全隻上油先? 用乜既油滲線? 用乜野thinner去wipe??

I used Mr. Color for base, and Tamiya black and thinner for 滲線.  All parts had been spray painted, and no problem with red, blue and yellow 滲線 and wiping off with Tamiya thinner.  Just having problems with white.......

[ 本帖最後由 FNG0202 於 2007-12-5 06:26 PM 編輯 ]

用枝新綿花棒點少少x20 wipe多幾次吧. 問題係你底油未乾就滲, 而且又等到琺瑯油乾晒先抹.
唔得就要好大膽同好少心咁用另一枝新綿花棒點少少郡氏開油水wipe. 注意, 要好小心. 同呢個係危險方法. 未到最後都唔好試.

OIC, thanks!  Will try again tonight.......hoepfully it will work!

滲線其中一個技巧: 唔係一大滴油點落去. 係放枝筆接觸條線既凹位, d油會自動吸入條線到. 唔夠油先再點, 可以分幾次, 同分段咁做, 咁樣就可以減少要抹走多餘既油既area了. (亦減少出錯機會)

[ 本帖最後由 VampireA 於 2007-12-5 06:39 PM 編輯 ]

I tried again last night, and there are improvement, but still have a little stain remaining after wiping off with thinner.....will continue to try and hopefully getting it right soon.

Thanks again for the advise!

I thing to consider, if you 滲線on flat paint , it is more difficult to wipe off/ sometimes you just cant clean them up totally . you may try paint it gloss first and spray a coat of clear flat after you 滲線

Thats the problem......my blue, red, and yellow are flat also but no problem cleaning off after 滲線.......but white will leave stain......thats why don't understand.....