高達模型既舊化除佐整污遭佢之外，燒傷、彈孔、光劍痕要如何製作，請指教，謝謝

[ 本帖最後由 hychan 於 2007-7-7 10:33 PM 編輯 ]

用辡雞、手提電動鑽、『香』製作

我唔明咩叫『光箭痕』

我都想問點整污遭佢

我老豆話油漆如果比火燒,會脫落?

you use a dremal* (google it ) to create some of the damage (i'm applying AFV techniques here... )

anyways for thick armour, you can just use the drill and drillllllllll not too deeply into the area,
for thinner armour, you have to drill the back ( thin it out) then penetrate the front with a knife or something (watch was size holes you make)

you usually have to sad your *battle damage* around down.... also the paint will show it better than anything...

lastly be very careful with heat equpiment as you can melt your gundam ( its ok if you burn yourself, you heal Xp )

gl

do it small first, practice !!

果 D係上左好耐油先會咁既情況發生~通常剛剛上色係唔會出現此情況~

冇人叫你上左色先放火


ｗａｓｈ

= =放心我唔會放火...無聊問下姐,不過渣古果係故事入面唔係應該上油漆咩?

應該用濕泥土整上去模型到就可以XDDD

其實想整到污糟~可以用舊化顏料~可以去弼街有氣泵賣同模型物料果間模型鋪~睇睇~